32
(Right)
(Front)
(Left)
NEA-300H
Speed Controller
The JR 120° CCPM system requires the use of three servos to operate, aileron, elevator, and Aux 1(Pitch). The labeling of these servos can become
quite confusing because with the CCPM function; the three servos no longer work independently, but rather as a team, and their functions are now com-
bined. For this reason, we will refer to the three servos in the following manner:
Aileron Servo: We will refer to this servo as the “Left” servo. The channel number for this servo when using a JR radio is CH2.
Elevator Servo: We will refer to this servo as the “Front” servo. The channel number for this servo when using a JR radio is CH3.
Aux 1 (Pitch) Servo: We will refer to this servo as the “Right” servo. The channel number for this servo when using a JR radio is CH6.
Please refer to the CCPM connections chart below for clarification. For non-JR radios, please consult your radio instructions for proper connection.
C. CCPM SERVO CONNECTIONS
IMPORTANT CCPM PROGRAMMING DOS AND DON’TS (CONTINUED)
G400 GYRO (OPTIONAL)
(JRPG400)
G400
To Next Page
Loading...
