41
Trimming the Body/Canopy
Body
Canopy
It will be necessary to remove the shaded areas shown
on the body using an X•Acto knife or rotary tool.
Trim away the shaded portion of the canopy area
using scissors (Lexan
®
scissors preferred).
Canopy Attachment
Test fit the canopy to the body before drilling the
mounting holes by taping the canopy to the body.
Trim the canopy as needed.
Drill the 6 mounting holes in the
body/canopy and secure using
the 6 provided screws.
To Next Page
Loading...
Need help?
General
