JR Voyager E - Page 54

54
PREASSEMBLED COMPONENTS (CONTINUED)
2 x 10 mm Flat Head Screw
2.6 x 8 mm Self Tapping Screw
Blade Holder Spacer (Inner)
Blade Holder Spacer (Outer)
Blade Holder Bearings,
4 x 10 x 4 mm
Main Blade Holder
Long side
is toward
the Holder.
Dampener
3 mm Flat Washer
3 mm Lock Nut
Spindle Shaft
Rotor Center Hub
Seesawarm
2.6 x 12 mm
Self Tapping Screw
Use Threadlock
2.6 mm Flat Washer
Seesawarm Bushing
Steel Joint Ball
2.8 mm Flat Head Screw
2.6 mm Flat Washer
Seesaw Shaft Bolt
Seesaw Shaft
ROTOR HEAD ASSEMBLY
WASHOUT ASSEMBLY TAIL PITCH PLATE ASSEMBLY
2.6 mm x 12 mm
Socket Head Bolt
Washout Arm
Steel Joint Ball
2 x 8 mm
Flat Head Screw
Washer Base
2 mm Stopper Ring
Washer Arm Pin
Washer Link
Washer Arm Bushing
Tail Slide Ring Sleeve
Tail Slide Ring
Tail Pitch Link