16
XF631 MANUAL • CHAPTER 3: Key Input and Display / CHAPTER 4: Battery Alarm and Display
Two input keys are located at the lower right and left
faceplate of the XF631 transmitter. The keys are used
to access and program the transmitter. Each key can
be moved up or down using your thumbs.
CHAPTER 4: Battery Alarm and Display
CHAPTER 3: Key Input and Display
KEY INPUT AND DISPLAY3
When the transmitter battery drops below 9.0 volts,
the display will start to flash BAT and an audible
alarm will sound for 8 beeps. These warnings mean
you should land your aircraft immediately.
Note: During the period that the battery alarm
is flashing, the input buttons will not
function. If you are currently in the
function mode, the transmitter will exit
automatically and return to the normal
display (see Section 5.1).
BATTERY ALARM AND DISPLAY4
Left button up........Scroll — Used to advance
through the menus.
Left button down...Channel — Used to advance
through the channels or features
in a given function.
Right button up........Increase — Increases value or
changes setting
(e.g., Reverse Normal).
Left button down......Decrease — Decreases value
or changes setting.
(e.g., Reverse Normal).
BAT
8.9
V
FLASHING
To Next Page
Loading...
Need help?
General
