JR XF631 - Chapter 6: Functions (System Mode); Data Reset Function Procedure

19
XF631 MANUAL • CHAPTER 6: Functions (System Mode)
Accessing the Data Reset Function
CHAPTER 6: Functions (System Mode)
The data reset function allows you to reset all the
programming in the selected model (1,2, or 3) to the
factory settings. Before using the data reset function,
it’s important to enter the model selection function
and select the desired model number (1,2, or 3) for
which you want to reprogram to the factory settings.
The model selection function is described in
Section 6.2.
1. Press the Scroll and Increase buttons up
simultaneously and hold.
2. Turn on the transmitter to enter the
System mode.
3. Press the Scroll button up until “RST” appears
on the screen.
4. Press the Channel and Increase buttons
simultaneously to reset the data. (To confirm that
the selected model's programming has been
reset, a beep will sound and the model number
will momentarily disappear from the screen.)
5. Press the Scroll button to access the model
select function.
6. To exit, press the Scroll and Increase buttons up
simultaneously.
DATA RESET
•
System Mode
6.1
RST
I
Programming Levers
CHANNEL
SCROLL
INCREASE
DECREASE
ENTER
DIGITAL TRIM EQUIPPED 6 CHANNEL
MULTI-DATA COMPUTER DISPLAY SYSTEM
In System Setup mode,
press the Scroll button up
until “RST” appears on
the screen.
Press the Channel button down and
Increase button up simultaneously
to reset the data (a beep will sound).
RST
1
INDICATES DATA RESET FUNCTION
MODEL NUMBER TO RESET