JR XF631 - Model Selection Function Procedure

20
XF631 MANUAL • CHAPTER 6: Functions (System Mode)
The XF631 has memory for 3 models.
1. Press the Scroll and Increase buttons up
simultaneously and hold.
2. Turn on the transmitter to enter the
System mode.
3. Press the Scroll button until “MDL”
appears on the screen.
4. Press the Increase or Decrease button to select
model number 1,2, or 3.
5. Press the Scroll button to access the wing type
entry function.
6. To exit, press the Scroll and Increase buttons up
simultaneously.
Accessing the Model Selection Function
MODEL SELECTION
•
System Mode
6.2
CHAPTER 6: Functions (System Mode) continued
MDL
I
Programming Levers
CHANNEL
SCROLL
INCREASE
DECREASE
ENTER
DIGITAL TRIM EQUIPPED 6 CHANNEL
MULTI-DATA COMPUTER DISPLAY SYSTEM
In System Setup mode,
press the Scroll button
until “MDL” appears on
the screen.
Press the Increase or
Decrease button to select
model number 1, 2, OR 3.
MDL
1
INDICATES MODEL SELECTION FUNCTION
MODEL NUMBER 1, 2, OR 3