4
XF631 MANUAL Quick Start
XF631 QUICK START
In this manual you will find in-depth instructions that
detail all the steps and procedures you should follow in
order to program each of the XF631’s features. For
modelers who want to get into the air fast, we have
provided Quick Start. Quick Start covers the basic
programming information necessary to get you airborne.
Later, when you want to learn more about specific features
of the XF631, turn to the appropriate pages(s) in this
manual for more detailed programming information.
Note: Please charge the system batteries as indicated
in step 4.1 before attempting the Quick Start setup
and again before flying the model.
Turn on the transmitter and check to ensure that the
aileron, elevator, and rudder trim valves are set to the
0 (neutral) position.
Next, set the throttle trim valve to the full low (-40)
position by pressing the throttle trim lever down.
DIGITAL TRIM SETTINGS
1
SERVO REVERSING
2
With the transmitter on, press the Scroll and Increase
buttons upward simultaneously until a beep is heard.
Press the Channel button to select
the channel you want to reverse.
Press the Increase or Decrease button
to reverse the direction of the
channel you selected.
To Next Page
Loading...
Need help?
General
