JRC JAN-9201 - Confirming the Compliant Standards for the Equipment

19-11 Section 19 Maintenance & Inspection
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
19
21
23
24
24
26
27
19.1.3.4 Confirming the compliant standards for the equipment
When you want to use a USB flash memory to read or write a file, make sure in
advance that the USB flash memory is not affected by a computer virus. If the
indicator is infected with a virus, other equipment will also be infected, with the result
that a trouble will occur.
Before removing the USB flash memory, check for the access lamp of the USB flash
memory and make sure that it is not being accessed. If you remove the USB flash
memory when it is accessed, data may be destroyed and a trouble may occur.
The standards related to the equipment are displayed if there is any RADAR or ECDIS equipment
Licence
1 Click on the [Menu] button on the left Tool Bar.
The menu is displayed.
2 Click on the [Maintenance] - [System Information] button on the menu.
The [System Information] dialog box appears.
3 Click on the [Specification] tab.
The equipment Licence standard specification information is displayed.
[1] [X] button
Closes the [System Information] dialog box.
[2] Equipment Licence information
The equipment Licence standard specification information is displayed.
[1]
[2]
[3]