JRC JHS-180 - 5.3.1.2 TX Tray; Transmitted Message Log

5-10
5.3.1.2 TX Tray
“TX Tray”(Message List) can be displayed by pressing [2] in “Message Menu”.
(Message List)
＊ＳＡＦＥ １１１１１１１１１ ＤＥＬ＞
ＲＯＵＴ ＯＫ ＢＲＯＡＤＣＡＳＴ ＥＤＩＴ＞
ＲＯＵＴ ＮＧ ＢＲＯＡＤＣＡＳＴ
ＳＡＦＥ ＡＫ ＮＩＨＯＮＭＡＲＵ ＞ ＆ＴＸ
ＴＸ ＴＲＡＹ ＵＴＣ１１：４３
ＴＸ ＝ ２０００／０２／０２ １０：００
ＣＡＴＥＧＯＲＹ ＴＯ
○
○
○
○
ＢＲＧ ： ＲＡＮＧＥ ＮＡＭＥ／ＭＭＳＩ
２７０°： ０．１８ＮＭ ＪＲＣ ＭＡＲＵ１
３５°： ０．２９ＮＭ ＪＲＣ ＭＡＲＵ２
２２°： ０．９２ＮＭ ＪＲＣ ＭＡＲＵ１
Pressing up-arrow key or down-arrow key selects the message.
Pressing [ENT] displays “Message Read”.
Pressing [ALM/CLR] returns to “Message Menu”.
(Transmitted Message Read)
ＥＸＩＴ＞
ＥＤＩＴ＞
ＴＸ ＭＥＳＳＡＧＥ ＲＥＡＤ ＵＴＣ１１：４３
ＭＭＳＩ：０００５６９８７２ ＲＥＰＬＹ：ＮＡＫ
ＣＡＴＥＧＯＲＹ：ＲＯＵＴＩＮＥ ＣＨ：Ａ／Ｂ
ＦＩ：ＣＡＰＡＢＩＬＩＴＹ ＩＮＴＥＲＲＯＧＡＴＥ
○
○
○
○
ＢＲＧ ： ＲＡＮＧＥ ＮＡＭＥ／ＭＭＳＩ
２７０°： ０．１８ＮＭ ＪＲＣ ＭＡＲＵ１
３５°： ０．２９ＮＭ ＪＲＣ ＭＡＲＵ２
２２°： ０．９２ＮＭ ＪＲＣ ＭＡＲＵ１
Pressing [ALM/CLR] returns “TX Tray” (Message List).
Pressing this select key displays “Edit and TX”.
Pressing this select key deletes the selected
message.
Pressing this select key returns “TX Tray”
(Message List).
Message type and setting
Transmitted time of the selected message.
Pressing this select key returns “Other ships list”.
Pressing this select key displays message
editor of “Edit and TX”.
Pressing this select key returns “Other ships list”.
When “BROADCAST”, “OK”: transmission success or “NG”: transmission failure is displayed.
When “MMSI”(addressed message), ”AK”: Acknowledge received or “NK”: Acknowledge not received is displays.