JRC JHS-180 - 5.3.3.4 Draught; Draught Input; 5.3.3.5 Height Over Keel; Height Over Keel Input

5-23
5.3.3.4 Draught
The cursor appears in the “Draught”.
Pressing numerical key inputs the value of “Draught”.
The value can be set “25.5m” as maximum.
Pressing [ALM/CLR] quits the inputting and returns to “Navigation Information Setting” menu.
Pressing [ENT] entries the inputted value and returns to “Navigation Information Setting” menu.
5.3.3.5 Height Over Keel
The cursor appears in the “Height Over Keel”.
Pressing numerical key inputs the value of “Height Over Keel”.
Pressing [ALM/CLR] quits the inputting and returns to “Navigation Information Setting” menu.
Pressing [ENT] entries the inputted value and returns to “Navigation Information Setting” menu.