JRC JHS-180 - 5.3.6.2 Channel Management Setting; AIS Channel Management

5-28
5.3.6.2 Channel Management Setting
“Channel Management” setting menu can be displayed by pressing [2] in the “Set Up” menu.
Eight channel management settings can be memorized in the transponder as maximum.
(“Channel Management” setting menu)
ＣＨ ＭＡＮＡＧＥＭＥＮＴ ＵＴＣ１１：４３
２．ＣＨ Ｂ：２０８８ ＮＡＲＲＯＷ ＲＸ
３．ＴＸ ＰＯＷＥＲ ：ＨＩＧＨ
６．ＡＲＥＡ Ｎ ３５°３３．３８７０‘
４．ＺＯＮＥ ＳＩＺＥ：５ｎｍ
（ＳＷ） Ｅ１３９°５４．５７８０‘ ＬＩＳＴ＞
１．ＣＨ Ａ：２０８７ ＷＩＤＥ ＴＸ／ＲＸ
５．ＡＲＥＡ Ｎ ３５°３３．３８７０‘ＣＨＥＣＫ＞
（ＮＥ） Ｅ１３９°５４．５７８０‘
○
○
○
○
ＢＲＧ ： ＲＡＮＧＥ ＮＡＭＥ／ＭＭＳＩ
２７０°： ０．１８ＮＭ ＪＲＣ ＭＡＲＵ１
３５°： ０．２９ＮＭ ＪＲＣ ＭＡＲＵ２
２２°： ０．９２ＮＭ ＪＲＣ ＭＡＲＵ１
Pressing up-arrow key or down-arrow key selects the sub menu.
Pressing [ENT] moves the cursor to the selected sub menu field.
Pressing numerical key [1] – [6] selects the sub menu and moves the cursor to the selected sub
menu field.
Pressing [ALM/CLR] returns to “Set Up” menu.
(1) Inputting of the Channel Management
“CH A”
The cursor appears in the “CH A” field.
Pressing numerical keys inputs the channel A number.
Pressing up-arrow key or down-arrow key selects the detail.
(“WIDE” or ”NALLOW”, “TX/RX” or “RX”)
Pressing [ALM/CLR] quits the inputting and returns to the “Channel Management” setting menu.
Pressing [ENT] entries the inputted number or detail and moves the cursor to the next field.
“CH B”
The cursor appears in the “CH B” field.
Pressing numerical keys inputs the channel B number.
Pressing up-arrow key or down-arrow key selects the detail.
(“WIDE” or ”NALLOW”, “TX/RX” or “RX”)
Pressing [ALM/CLR] quits the inputting and returns to the “Channel Management” setting menu.
Pressing [ENT] entries the inputted number or detail and moves the cursor to the next field.
Pressing this select key checks whether or not
the inputted detail can be set to the
transponder.
Pressing this select key displays the channel
management setting of the transponder.