JRC JHS-180 - 5.3.7.1 TRX Condition log display; TRX Condition Monitoring

5-35
5.3.7.1 TRX Condition log display
“TRX Condition” log display can be displayed by pressing [1] in the “Maintenance” menu.
Latest condition is displayed as “1” (Operating condition).
(“TRX Condition” log display)
Pressing up-arrow key or down-arrow key scrolls the display.
Pressing [ALM/CLR] returns to “Mailtenance” menu.
“Channel A and B” number
“TX Power” (“HIGH” / ”LOW”)
“Northeast Corner of the Area”
“Southwest Corner of the Area”.
TRX mode (“TX/RX” / “RX”)
(When channel management operation)
ＴＲＸ ＣＯＮＤＩＴＩＯＮ ＵＴＣ１１：４３
ＣＨ Ｂ：２０８８ ＮＡＲＲＯＷ ＲＸ
ＴＸ ＰＯＷＥＲ ：ＨＩＧＨ
ＡＲＥＡ Ｎ： ３５°３３．３８７‘
ＺＯＮＥ ＳＩＺＥ：５ｎｍ
↓ （ＳＷ） Ｅ：１３９°５４．５７８‘
１．ＣＨ Ａ：２０８７ ＤＥＦＡＵＬＴ ＴＸ／ＲＸ
ＡＲＥＡ Ｎ： ３５°３３．３８７‘
（ＮＥ） Ｅ：１３９°５４．５７８‘
ＣＨ Ｂ：２０８８ ＮＡＲＲＯＷ ＲＸ
ＴＸ ＰＯＷＥＲ ：ＨＩＧＨ
ＡＲＥＡ Ｎ： ３５°３３．３８７‘
ＺＯＮＥ ＳＩＺＥ：５ｎｍ
↓ （ＳＷ） Ｅ：１３９°５４．５７８‘
２．ＣＨ Ａ：２０８７ ＤＥＦＡＵＬＴ ＴＸ／ＲＸ
ＡＲＥＡ Ｎ： ３５°３３．３８７‘
（ＮＥ） Ｅ：１３９°５４．５７８‘
↑
○
○
○
○
ＢＲＧ ： ＲＡＮＧＥ ＮＡＭＥ／ＭＭＳＩ
２７０°： ０．１８ＮＭ ＪＲＣ ＭＡＲＵ１
３５°： ０．２９ＮＭ ＪＲＣ ＭＡＲＵ２
２２°： ０．９２ＮＭ ＪＲＣ ＭＡＲＵ１
Bandwidth (“Wide“ / “Narrow”)
“Zone Size”