JRC JHS-180 - 5.3.6.1 Password Setting; Password Management

5-27
5.3.6.1 Password Setting
“Password” setting menu can be displayed by pressing [1] in the “Setup” menu.
(“Password” setting menu)
ＰＡＳＳＷＯＲＤ ＵＴＣ１１：４３
ＮＥＷ：＊＊＊＊
ＯＬＤ：＊＊＊＊
ＮＥＷ：＊＊＊＊
２．ＰＡＳＳＷＯＲＤ ＳＥＴ／ＣＨＡＮＧＥ
１．ＰＡＳＳＷＯＲＤ ＊＊＊＊
○
○
○
○
ＢＲＧ ： ＲＡＮＧＥ ＮＡＭＥ／ＭＭＳＩ
２７０°： ０．１８ＮＭ ＪＲＣ ＭＡＲＵ１
３５°： ０．２９ＮＭ ＪＲＣ ＭＡＲＵ２
２２°： ０．９２ＮＭ ＪＲＣ ＭＡＲＵ１
Pressing up-arrow key or down-arrow key selects the sub menu.
Pressing [ENT] moves the cursor to the selected sub menu field.
Pressing numerical key [1] – [2] selects the sub menu and moves the cursor to the selected sub
menu field.
Pressing [ALM/CLR] returns to “Setup” menu.
(1) “Password” conforming
The cursor appears in the “Password”.
Pressing numerical key inputs the password.
Pressing [ALM/CLR] quits the inputting and returns to the “Password” setting menu.
Pressing [ENT] conforms the inputted password and displays “OK” or “NG” as the result.
(2) “Password Set/Change”
The cursor appears in the “Password Set/Change”.
Pressing numerical key inputs the password.
Pressing [ALM/CLR] quits the inputting and returns to the “Password” setting menu.
Pressing [ENT] entries the inputted password and moves the cursor to the next field.