JRC JHS-182 - Turning off the Power

5-10

5.2.2 Turning OFF the power

WARNING：
The PASSWORD must be entered to turn off the power.
The password preset before shipment is “0000”. The administrator must manage
PASSWORD.

Press OFF key for turning off the power at first. The Display of PASSWORD Input (refer to the
following figure) is displayed after pressing OFF key.



Next page is displayed when the Jog Dial is pressed after the
password of four figures is entered.
(Refer 5.2.4 KEYBOARD DISPLAY AND INPUT METHOD to input
the password.)
After inputting the correct password, the display for turn off the
power is appears, then press and holding the PWR/DIM and OFF
keys together for one second until the power is turned off.













MAINMENUUTC11:44
BRG:RNG NAME/MMSI
270 ° :0.18NM
35
° :0.29NM
*22
° :0.92NM
OCEAN-LINE
QUEEN
ABCDEFG-MARU



PASSWORD:****







ABCDEFGHIJKLMNOP
QRSTUVWXYZ.0123
456789[]“#$%&’
()?@+-*/^,:;<=>!
[EXIT]
[ENT]


WARNING：
Input the password before the power supply is turned off, otherwise the setup contents
may not be saved.
Display of PASSWORD Input