JRC JHS-182 - Group Ship Registration

5-49
5.3.4.6 GROUP SHIP REGISTORATION

When 6.GROUP SHIP is selected, GROUP SHIP opens.
Use this screen for registering group ships.
Maximum 10 ships can be registered as a group ship.
When [SAVE] is selected, the information is saved.
Other ships which are registered as group ships, obtain “*” on the
other ships list. And the Ship Name shown in other ships list
succeeds the names which are registered from this screen.


１．Entering Name
When this menu opens, the cursor is on 1.
Rotate the Jog Dial and the cursor move up/down over the numbers.
Select the number and press the Jog Dial, the cursor jumped to the entry of NAME and at
the same time, a cursor is on A in the keyboard area. Then the name can be entered.
The method of using keyboard, see 5.1.1
２．Entering MMSI
After completing the name entry, select and push [NEXT] by the Jog Dial, then the cursor
jumps to the MMSI entry area.
Numeric Entry for MMSI, see 5.1.2.
When the entry of MMSI has completed, the cursor move to next line.
While the cursor is between 1 and 10, if it is rotated counter clockwise, then jump down to [EXIT].
(Not Keyboard Area)
Select [EXIT], then discard the contents and return to SETUP.
Select [SAVE], then save the contents and return to SETUP.
Select [ALL CLEAR], and then discard all contents and the cursor returns to 1.

GROUPSHIPUTC11:44
BRG:RNG NAME/MMSI
270 ° :0.18NM
35
° :0.29NM
*22
° :0.92NM
OCEAN-LINE
QUEEN
ABCDEFG-MARU
1.12345678901234567890
MMSI:123456789
2.ABCDEFGHIJKLMN
MMSI:123123132
3.BBBBBB
MMSI:473098755
4.V
MMSI:
5.
▼ MMSI:
ABCDEFGHIJKLMNOP
QRSTUVWXYZ.0123
456789[]“#$%&’
()?@+-*/^,:;<=>!
[EXIT]
[SET]
[SAVE]
[ALLCLR]

Group Ships Registration Screen