JRC JHS-182 - Waypoints Setting

5-19
5.3.1.6 Waypoints Settings
When 6. WAYPOINTS is selected, the Waypoints Setting appears. Up to 14 Waypoints can be set
up.
Rotate the Jog Dial to move the cursor for selecting the number of
the waypoints.
To enter the waypoint, press the Jog Dial after selecting the
waypoint.
To return to the Voyage Data Setting menu (5.3.1) , press CLR .




After completing the setting for No.5 the above, the cursor moves into the small window on the
bottom of the screen.
• When [EXIT] is selected, the entered contents are canceled and “VOYAGE DATA SETTING”
appears.
• When [SCROLL] is selected, the process continues to enter another 5 items (positions). For
example, if you press [SCROLL] after you filled No.1-5, the cursor moves to No.6 and you can
set up No.6 to No.10. (For setting up the next 6 items, you must complete entering the last
item of the screen. This means you have to complete No.6 for going to the next screen and
entering No.6-10. If you are still between No.1 and No.5, you cannot go to the next screen.)
• When [SAVE] is selected, the process goes back to “VOYAGE DATA SETTING” after saving
the entered data.
• When [ALL CLEAR] is selected, the entered data is lost and the cursor returns to No.1 after
the screen turns blank .
WAYPOINTSUTC11:44
BRG:RNG NAME/MMSI
270 ° :0.18NM
35
° :0.29NM
*22
° :0.92NM
OCEAN-LINE
QUEEN
ABCDEFG−MARU
NO.POSITION
1.S89°59.999ʼ
W179°59.999ʼ
2.S88°59.999ʼ
W178°59.999ʼ
3.

4.

5.


[EXIT][SCROLL]
[SAVE][ALLCLEAR]

Waypoints Setting