EasyManua.ls Logo

JRC JHS-182 - Navigational Status

JRC JHS-182
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-15
5.3.1.1 NAVIGATIONAL STATUS
When 1.NAVIGATIONAL STATUS is selected, the navigational status is ready to be selected.
When the Jog Dial is pressed on 1.NAVIGATIONAL STATUS, the cursor is moved down to the
second line.
On the line, the displayed item changes as the Jog Dial is rotated.
Therefore rotate the Jog Dial until the item to select is displayed.
Press the Jog Dial to confirm when the cursor is on the item.
The cursor moves to next item (2. DESTINATION) after the selection was made.
To cancel the input, press CLR key, and then the Voyage Data Setting Menu appears.
The Navigational Status will be selected from listed below:
UNDER WAY USING ENGINE
AT ANCHOR
NOT UNDER COMMAND
RESTRICTED MANOEUVRABILITY
CONSTRAINED BY HER DRAUGHT
MOORED
AGROUND
ENGAGED IN FISHING
UNDER WAY SAILING
RESERVED FOR HSC (High Speed Craft)
RESERVED FOR WIG (Wing-in-Ground Effect Craft)
NOT DEFINED
VOYAGEDATASETUTC11:44
BRN:RNG NAME/MMSI
270
°
:0.18NM
35
°
:0.29NM
*22
°
:0.92NM
OCEAN-LINE
QUEEN
ABCDEFG-MARU
1.NAVIGATIONALSTATUS:
RESTRICTEDMANOEUVRABILITY
Navigational Status

Table of Contents

Other manuals for JRC JHS-182

Related product manuals