JRC JHS-182 - User Alarm Setting; Guard Zone Alarm Setting

5-39
5.3.3 USER ALARM SETTING
ALARM SETTING menu is displayed when 3.ALARM SETTING is selected in the Main Menu.
The alarms that users can change the alarm settings are GUARD ZONE ALARM and LOST
TARGET ALARM. On this screen, users can change the settings of these alarms.
Initially the cursor is on 1.GUARD ZONE. When the Jog Dial is rotated, the cursor moves over the
selections (1.GUARD ZONE → 2.LOST TARGET → 3. USER ALARM HISTORY) , so select one of
them and confirm the selection by pressing the Jog Dial.









Pressing CLR key returns the display to the Main Menu.





User Alarm Setting
5.3.3.1 GUARD ZONE ALARM SETTING
To set Guard Zone alarm, select 1.GUARD ZONE in the USER ALARM SETTING menu. If a
other ship approach into the Guard Zone range, a warning message-“GUARD” is displayed and the
buzzer beeps.
The Guard Zone range stands for the radius centered by own ship, and can be set up to 99.9 NM.
In the case the Guard Zone range is set to zero (0), the GUARD ZONE ALARM is disable.
(1). From USER ALARM SETTING MENU, use the Jog Dial and select 1.GUARD ZONE
(2). With the Jog Dial, input the radius.(see 5.3.3)
① Maximum 99.9NM.
② When it is set 0.00NM, then the alarm will be canceled.
③ When the Jog Dial is pressed, the selection is confirmed.
④ When CLR key is pressed, the selection is canceled.
(3). The cursor moves to BUZZER: , then select and confirm ON/OFF by the Jog Dial.
(4). The cursor jumps to the next item.
USERALMSETTINGUTC11:44
BRG:RNG NAME/MMSI
270 ° :0.18NM
35
° :0.29NM
*22
° :0.92NM
OCEAN-LINE
QUEEN
ABCDEFG-MARU

1.GUARDZONE:0.0NM
BUZZER:ON

2.LOSTTARGET:0.0NM
BUZZER:OFF

3.USERALARMHISTORY

