5-24
5.3.1.10 Re-load destination from ever set data
When the [DEST. LOAD] in the small window is selected, 5 entered destinations (the present
destination and 4 destinations in the past) which can be displayed.
When the destination is selected from 5 entered destinations on the screen, the destination can be
displayed under the 2.DESTINATION and the Voyage Data Setting menu can be displayed.
If CLR is pressed, the contents are canceled and Voyage Data Setting menu is displayed.
In the screen that displays 5 destinations, the content is displayed as the newest destination when
the destination was selected. For example, the following figure can be displayed after the
3.TOKYO was selected on above.
In the above figure, 3.TOKYO is displayed as follows after selection as the example.
(Example)
1. YOKOHAMA 1. TOKYO
2. ABCDEFGHIJKLMNOPQRST 2. YOKOHAMA
3. TOKYO 3. ABCDEFGHIJKLMNOPQRST
4. AFRICA 4. AFRICA
5. 01234567890123456789 5. 01234567890123456789
VOYAGEDATASETUTC11:44
BRN:RNG NAME/MMSI
270
°
:0.18NM
35
°
:0.29NM
*22
°
:0.92NM
OCEAN-LINE
QUEEN
ABCDEFG-MARU
1.YOKOHAMA
2.ABCDEFGHIJKLMNOPQRST
3.TOKYO
4.AFRICA
5.01234567890123456789
VOYAGEDATASETUTC11:44
BRN:RNG NAME/MMSI
270
°
:0.18NM
35
°
:0.29NM
*22
°
:0.92NM
OCEAN-LINE
QUEEN
ABCDEFG-MARU
▲
6.WAYPOINTS
7.WAYPOINTTEXT:
ABCDEFGHIJKLMNOPQRST
8.PERSONSONBOARD:
8191ORMORE
9.HEIGHTOVERKEEL:
204.7MORGREATER
[EXIT][ENT]
[DEST.LOAD]
VOYAGEDATASETUTC11:44
BRN:RNG NAME/MMSI
270
°
:0.18NM
35
°
:0.29NM
*22
°
:0.92NM
OCEAN-LINE
QUEEN
ABCDEFG-MARU
1.NAVIGATIONALSTATUS:
RESTRICTEDMANOEUVRABILITY
2.DESTINATION:
01234567890123456789
3.ETA:12/3123:31
4.DRAUGHT:25.5MORMORE
5.CARGO/STATUS:
CATEGORYA(DG/HP/MP)
▼
Select
[DEST.LOAD]
CLR key
Press the Jog Dial after
the selection is made.