JRC JHS-182 - Keyboard Display and Input Method; Numerical Input

5-12

5.2.4 Keyboard Display And Input Method
When input operation starts, the cursor is on “A” in the keyboard
area at the bottom left of the screen.

The cursor jumps into the Text Setting Window if the Jog Dial is
rotated clockwise when the cursor is on “!” in the keyboard area.
The cursor jumps back onto “!” in the Keyboard area if the Jog
Dial is rotated counter clockwise when the cursor is on the
top-row in the Text Setting Window.
5.2.5 Numerical Input
The procedure for entering numbers is mentioned below.
Input start 10.0NM 12.0NM Press CLR
10.0NM 40.0NM 42.0NM
42.8NM 42.8NM (finished)
The numbers are always entered from left to right for each digit.
When CLR key is pushed, the input position (Cursor) moves back to the left.
MAINMENUUTC11:43
BRG:RNG NAME/MMSI
270°:0.18NM
35°:0.29NM
*22°:0.92NM
OCEAN-LINE
QUEEN
ABCDEFG−MARU










ABCDEFGHIJKLMNOP
QRSTUVWXYZ.0123
456789[]“#$%ʼ
()?@+-*/^,:;<=>!
Text Setting
Window

Cu rs or moves
to next right
Select a number
Press for Confirm
[ENT]
Select a number
Cu rs or moves
to the left
Re-setup
Press for Confirm
[ENT]
Select a number
Press for Confirm
[ENT]
Select a number
Press for Confirm
[ENT]