JRC JHS-182 - Page 41

5-20
a) Waypoint Setting Procedure
SETTINGS WAYPOINTS ITEMS





 




 
WAYPOINTS CONTENTS SETTINGS
1. Rotate the Jog Dial to select the number of the sailing plan.
2. Press the Jog Dial, then cursor moves to the latitude input.
3. Rotate the Jog Dial to selecting N or S, and confirm the selection by pressing the Jog Dial.
4. Set up degree/minute/second of the latitude.
Therefore, the ranges for latitude and longitude are:
Latitude: N/S 0〜90゜00.000
Longitude: E/W 0〜180°00.000
5. The entry for latitude has finished, the cursor jumps to longitude entry. Following the entry
method for latitude, set up longitude also.
6. When the entry for longitude has been completed, the cursor jumps to the next NO. So set the
waypoint up same as above.
If CLR key is pressed, the procedure will be canceled and “Sailing Information Setting Menu”
appears.
WAYPOINTSUTC11:44
BRG:RNG NAME/MMSI
270 ° :0.18NM
35
° :0.29NM
*22
° :0.92NM
OCEAN-LINE
QUEEN
ABCDEFG−MARU
NO.POSITION
1.89°59.999
179°59.999

WAYPOINTSUTC11:44
BRG:RNG NAME/MMSI
270 ° :0.18NM
35
° :0.29NM
*22
° :0.92NM
OCEAN-LINE
QUEEN
ABCDEFG−MARU
NO.POSITION
1.N89°59.999’
E179°59.999’
2.59999
17959999
Waypoints Setting
Displaying Next Item