5-21
Addition of Waypoints
For adding new items between existing items, follow the procedure below:
a. If you want to add a setting between No.1 and No.2, then
put a cursor on No.1.
b. Press the Jog Dial one time for making 1. blink.
c. Rotate the Jog Dial clockwise until “2” appears. Then
press the Jog Dial.
d. As to the items after NO.2, the numbers advance by one
(e.g. No.2→No.3, No.3→No.4, etc.), and No.2 that is not
set up yet is newly created.
e. Set up the newly created No.2 following (1) WAYPOINTS
CONTENTS SETTINGS above.
WAYPOINTSUTC11:44
BRG:RNG NAME/MMSI
270
°
:0.18NM
35
°
:0.29NM
*22
°
:0.92NM
OCEAN-LINE
QUEEN
ABCDEFG−MARU
NO.POSITION
1.N89°59.999’
E179°59.999’
2.N88°59.999’
E179°59.999’
WAYPOINTSUTC11:44
BRG:RNG NAME/MMSI
270
°
:0.18NM
35
°
:0.29NM
*22
°
:0.92NM
OCEAN-LINE
QUEEN
ABCDEFG−MARU
NO.POSITION
2.N89°59.999
E179°59.999
2.N88°59.999
E179°59.999
WAYPOINTSUTC11:44
BRG:RNG NAME/MMSI
270
°
:0.18NM
35
°
:0.29NM
*22
°
:0.92NM
OCEAN-LINE
QUEEN
ABCDEFG−MARU
NO.POSITION
1.N89°59.999’
E179°59.999’
2.N80°90.000’
E190°90.000’
3.N88°59.999’
E179°59.999’
Addition of Waypoints