EasyManua.ls Logo

JRC JHS-182 - Page 48

JRC JHS-182
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-27
b) MESSAGE TYPE SETTINGS - setting example
1. From MESSAGE MENU (5.3.2), select 1. EDIT AND TX
and press the Jog Dial.
2. EDIT AND TX opens. When “EDIT AND TX” opens, the
cursor is on 1.
3. Rotate the Jog Dial, then the cursor moves up and down
over the numbers (1, 2, 3, 4…) and the items at the bottom
([EXIT], [SAVE], [EDIT], [ALL CLEAR]).
4. Make a selection and press the Jog Dial.
5. If a confirmation is made while the cursor is at 1-6, the
cursor jumps to the right side of “:” of each items. (e.g. If
the Jog Dial is pressed when the cursor is on 5. , the cursor
moves to ”A/B.” Then “A/B” turns into” A/B “)
6. By rotating Jog Dial, view the selections and press the Jog
Dial when you want to confirm the selection being
displayed on the screen. (In this example, the selection
varies AUTO A B A/B AUTO…)
Selection and Confirmation
(1) FORMAT
Setting up directions of messages.
1. “ADDRESSED” or “BROADCAST” can be selected by rotating the Jog Dial.
2. Select “ADDRESSED” for sending messages to individuals and confirm it by pressing the Jog
Dial.
3. Select ”BROADCAST” for sending messages to all ships and confirm it by pressing the Jog
Dial
4. Only when ”ADDRESSED” is selected, enter MMSI. Initially “000000000”is displayed so select
9 digits with the Jog Dial and confirm it by pressing the Dial.
(2) CATEGORY
Select category of message.
1. By rotating the Jog Dial, select “SAFETY” or “ROUTINE.”
2. Select “SAFETY” for sending a message about safety, and select “ROUTINE” for sending an
message on ordinary tasks.
3. After making a selection, press the Jog Dial for confirmation.
(3) FUNCITON
Select the function of messages:
1. “TEXT” and“ CAPABILITY INTERROGATE” are selectable by rotating the Jog Dial.
2. If you send a text message, select “TEXT”, and if you send an interrogation select
“CAPABILITY INTERROGATE”.
(4) REPLY
Select the response to messages is requested or not requested:
1. “ON” and “OFF” are selectable by rotating the Jog Dial.
2. For messages which are sent personally, if response to reception required, then select “ON”,if
not “OFF”
EDITANDTXUTC11:44
BRG:RNG NAME/MMSI
270
°
:0.18NM
35
°
:0.29NM
*22
°
:0.92NM
OCEAN-LINE
QUEEN
ABCDEFG−MARU
1.FORMAT:ADDRESSED
MMSI:987654322
2.CATEGORY:ROUTINE
3.FUNCTION:
TEXT
4.REPLY:ON
5.CH:A/B
6.NUMBEROFRETRY:3
[EXIT]
[SAVE]
[EDIT]
[ALLCLR]

Table of Contents

Other manuals for JRC JHS-182

Related product manuals