9-16
T0 TEST
WRITE ACCESS OFF
T1 SIMULATION
BTLONG=+RR.RRKN
T2 SIMULATION
BTTRANS=+RR.RRKN
T3 SIMULATION
DEPTH=+RRR.RR M
T4 SIMULATION
DPT=--- BT=---
4.2.13.1 Menu T1 BT longitudinal Speed simulation
WARNING: the log stops to operate when in this mode. This menu sets
JLN-900 log in speed and depth simulation mode and the output stream
contains NMEA sentences with the bottom track longitudinal speed set to
the value on the display. NOTE: Simulation starts when the menu is
accessed. Press "+" or "-" to adjust the speed momentarily, ENTER to
save current simulated speed value.
T1 Simulation
BTLong=±RR.RRKN
4.2.13.2 Menu T2 BT transversal Speed simulation
WARNING: the log stops to operate when in this mode. This menu sets
JLN-900 log in speed and depth simulation mode and the output stream
contains NMEA sentences with the bottom track transversal speed set to
the value on the display.
T2 Simulation
BTTrans=±RR.RRKN
4.2.13.3 Menu T3 Depth simulation
WARNING: the log stops to operate when in this mode. This menu sets
SAL T-series log in speed and depth simulation mode and the output
stream contains NMEA sentences with the depth set to the value on the
display. NOTE: Simulation starts when the menu is accessed. Press "+"
or "-" to adjust the depth momentarily, ENTER to save current simulated
depth value.
T3 Simulation
Depth=RRR.RR m
To Next Page
Loading...