4-30
Intermediate Tube and Blanking Plate Manufacture
1. Use Table 2.1 above to choose the required Intermediate Tube length and the part
number and the length of the Transducer Connecting Tube to be ordered or already
supplied.
2. Prepare the Intermediate Tube according to the dimensions shown in Fig. 2.3.
The material used should be steel, type ISO S355JR or equivalent.
Fig. 2.3 Intermediate Tube
Ø132
Ø149.8
0
-0.3
Ø160
10
10
45°
20°
Ø132
Ø149.8
0
-0.3
Ø160
10
10
45°
20°
L
To Next Page
Loading...