JRC JMA-5332-12 User Manual

Setting display by color
Procedures 1 Press the [MARK] key for 2 seconds.
The Mark Setting menu will appear.
2 Open the Display Mark Color menu by performing the following menu
operation.
2. Display Mark Color
3 Press the [1] key.
Selected items for All will be displayed.
4 Press the [3] key to make Individual setting.
Off : All colors are not displayed.
On : All colors are displayed.
Individual : Setting by color is activated.
5 Press numeric keys corresponding to each mark font / line pattern
display.
On : Displayed.
Off : Not Displayed.
Setting the mark font size
Procedures 1 Press the [MARK] key for 2 seconds.
The Mark Setting display will appear.
2 Open the Select Mark Size menu by performing the following menu
operation.
4. Select Mark Size
3 Press numeric keys corresponding to the mark font size to be set.
Normal : The mark is displayed in normal size.
Small : The mark is displayed in a size smaller than usual.
3-59

JRC JMA-5332-12 Specifications

General

Brand	JRC
Model	JMA-5332-12
Category	Marine Radar
Language	English