Inter Switch Menu (with 3 or More Display Units)
①：
Connected scanner unit
In mode for naming a display unit or antenna unit, clicking on a unit opens the name input window.
②, ③：Display unit connected as master, and Display unit connected as
slave
If this button is clicked, select / cancel the display unit.
If this button is clicked in the naming a display unit or scanner unit mode , the name input window is
opened.
④：Name
If this button is clicked, set to the display or scanner unit rename mode.
⑤：File Operations
If this button is clicked, the File Operations menu is opened.
⑥：Set
If this button is clicked, the change of connection is determined.
⑦：Exit
If this button is clicked, the Inter Switch Menu is closed.
A-5
To Next Page
Loading...
