11.11 Target Tracking Unit (NCA-877WA)
yyy
yyyy
yyyy
11.11 TARGET TRACKING FUNCTION
(NCA-877WA/877A) (OPTION)
Radar mode, synthesis mode
(1) Available range scale All range
(2) Acquisition MANUAL/AUTO(by two automatic
acquisition/activation zone)
Acquisition range : 0.1 to 32 NM (Available all range scale)
(3) Tracking Normal edition type NCA-877A : 30 targets
High performance type NCA-877WA : 100 targets
Tracking range : 0 to 32 NM (Available all range scale)
(4) Display Tracking data : 4 at the same time. (Can be scroll.)
Naming function : Possible to name by the alphabet up to 8
characters to each target.
The range, bearing, CPA, TCPA, true course, true speed, BCR,
BCT of target can be displayed. (When naming is displayed,
BCR/BCT can’t be displayed.) Vector display : True/Relative
Past position
(5) Alarm Automatic acquisition/activation zone
Danger ship : Depends on CPA/TCPA setting.
(6) Trial Maneuver (NCA-877WA) Input parameter : Course, Speed, Vector time, Time to
Maneuver, Reach, Turn Radius, Acceleration, Deceleration
Synthesis mode
(7) Another ship track 20 targets. 1500 points per one target can be displayed. (Own
ship track and marks are another.)
Display color : 7 colors (The display color of each target can be
set.) (The display color of all targets can be set by the batch. In
this case, the display color is one color.)
Interval of save : 3/5/10/30 sec, 1/3/5/10/30/60 min, 1/3/5/10
NM Possible to storage in memory card (Option).
Note : ARPA Process Unit (NCA-877WA) or ATA Process Unit (NCA-877A) must be fitted on ships
compliant to IMO.
11
11-12
To Next Page
Loading...
Need help?
General
