3 – 35
[
22
] Pull-down Menu Type of Setting Change
This method is used when there are three or more selections:
q
When PROC1 is set as shown in the figure q:
w
Move the arrow cursor to the position in the figure w (downward triangle) with the trackball.
e
Put the arrow cursor on the position in the figure w and press the trackball section left button.
r
A pull-down menu will be opened displaying selections in the menu.
t When changing between selections, operate in the same manner.
Move the arrow cursor with the trackball.
The selection positioned with the arrow cursor will appear in reverse.
To Next Page
Loading...
