JRC JMA-9832-SA - Setting Own Ships Speed

5 – 5
……Setting Own Ship’s Speed …………………………………………
[
11
] When the LOG is not in operation (Manual Setting)
If the LOG is not in operation, set an estimated own ship’s speed manually.
1 Press .
The Main Menu will appear.
2 Press , then .
The SETTING1 Menu will appear.
3 Press .
will be set and pull-down menu will
appear.
4 Press .
will be set.
5 Press .
3. will be selected.
6 Enter a value of own ship’s speed from any of ten-key
or and .
7 Press .
Own ship’s speed will be set.
ENT
-
+
SET MANUAL SPEED
3
1. MANUAL
1
2.SELECT SPEED
2
1
8
MENU
Procedures
SUB1 MENU
SETTING1
2.SELECT SPEED
4.
1.SET GYRO
0.
EXIT
3.
SET MANUAL SPEED
SANUAL SPEEDSELECT NAV
5.
SET/DRIFT
6.
TIME/DAY
9.
SETTING2
0.0
1. NONE
1. MANUAL
3. 2AXIS W
4. 2AXIS G
7.PRF
2. HIGH
8.RANGE SELECT
96nm 120nm
2. 1AXIS
1. MANUAL
SUB1 MENU
SETTING1
2.SELECT SPEED
4.
1.SET GYRO
0.
EXIT
3.
SET MANUAL SPEED
5.
SET/DRIFT
6.
TIME/DAY
9.
SETTING2
0.0
1. MANUAL
7.PRF
1. HIGH
8.RANGE SELECT
96nm 120nm
SELECT NAV