JRC JMA-9832-SA - 3 Basic Operation

SECTION 3
BASIC OPERATION
3.1 FLOW OF OPERATION
■ Power ON and Start the System
..........................
3-2
■ Observe and Adjust Video
...................................
3-4
■ Tuning Operations
...............................................
3-6
■ Acquire and Measurement Data
..........................
3-7
■ End the Operation and Stop the System
.............
3-7
3.2 MENU COMPOSITION
..............................
3-8
3.3 PREPARATION
■ Tuning
................................................................
3-11
■ Sensitivity Control
..............................................
3-11
■ Display Brilliance Control
...................................
3-11
■ Contrast Control
.................................................
3-12
■ Sea Clutter Suppression
....................................
3-12
■ Rain/Snow Clutter Suppression
.........................
3-13
■ Brilliance Control
................................................
3-13
■ Day/Night Mode Selection
.................................
3-19
■ Color Setting
......................................................
3-20
■ Degaussing
........................................................
3-31
■ Radar Interference Rejection
.............................
3-31
3.4 BASIC OPERATIONS
■ Move Cross Cursor Mark [ + ] by Trackball
.......
3-33
■ Methods for Setting Menu Item with
the Trackball
......................................................
3-34
■ Use EBLs (Electronic Bearing Lines)
.................
3-40
■ Set Floating EBL
................................................
3-43
■ Select Range
.....................................................
3-45
■ Set Maximum Range
.........................................
3-45
■ Select Pulse Length
...........................................
3-46
■ Select Bearing Display Mode
.............................
3-46
■ Cancel Ship’s Heading Line
..............................
3-47
■ Cancel All Display Items Except HL and
Cross Cursor Mark [ + ]
.....................................
3-47
■ Display PI (Parallel Index Lines)
........................
3-48
■ Select True/Relative Motion Display Mode
........
3-50
■ Move Own Ship’s Display Position
....................
3-51
■ Display Other Ships’ Trails
................................
3-52
■ Display Own Ship’s Track
..................................
3-53
■ Marking
..............................................................
3-56
■ Display Range Rings
.........................................
3-57
■ Display Variable Range Markers
.......................
3-57
■ Set Guard Zones
...............................................
3-59
■ Reset Alarm Buzzer
...........................................
3-61
■ Set Alarm Sound Level
......................................
3-62
■ Check Operational Status
..................................
3-63
■ FUNCTION
........................................................
3-72
■ Expand Targets
.................................................
3-73
■ Display Processed Videos
.................................
3-74
■ Reduce Radar Interference
...............................
3-75
■ Personal Information
..........................................
3-76
■ Display of Navigational Information
...................
3-79
■ Function of OPTION Switch
..............................
3-96
■ Operation of Performance Monitor
....................
3-97
■ EBL Maneuvering
............................................
3-103