Section 8 Functions of the ECDIS (Option) 8-18
8.5 Changing the Object Category
(S-57/C-MAP Only)
SENC (System Electronic Navigation Chart) information available for display in the chart is subdivided
into three object groups; Base (Base display), STD (Standard Display), and All (All display). You can
change the object category using the display panel.
Base (Base Display)
A group of important objects that cannot be deleted from the charts (coastline and safety contour lines)
STD (Standard: Standard display)
A group of objects less important than base display (fixed and floating objects for monitoring)
All (All display)
All objects
Custom (Custom)
Refer to "8.5.2 Customizing object display"
Memo
About display in the chart
Display in the chart can be considered as the composite of various layers. For example, STD
(Standard: Standard display) is the composite of object layers for Base (Base display) and object
layers for STD (Standard: Standard display).
In addition to the object layers of the S-57/C-MAP charts themselves, own ship, user charts, event
marks, EBL/VRM, radar images, etc. can be combined and then displayed.
Note
The initial chart screen status is "STD (Standard: Standard display)". For safe sailing, use the
"STD (Standard: Standard display)" or "All (All display)", not the "Base (Base display)".
Event marks, etc.
Laye
You will see all layers being selected.
Objects of "All (All display)"
Objects of "STD (Standard: Standard display)"
Objects of "Base (Base standard)"
Laye
Laye
Laye
To Next Page
Loading...
