JRC JMR-7282-S - Displaying a Chart Boundary; Setting a Boundary to be Displayed on the Chart

Section 13 Operating a Chart (option) 13-12
13.6 Displaying a Chart Boundary
The boundary of the chart on the position on which the button was clicked is displayed.
13.6.1 Setting a boundary to be displayed on the
chart
A chart boundary can be displayed.
1 Click on the [Menu] button on the left toolbar.
The menu is displayed.
2 Click on the [Chart] - [Graphical Index] on the menu.
The [Graphical Index] dialog box appears.
3 Select the chart whose boundary is to be displayed among the [Chart Boundary] check
boxes.
4 To display the chart name in addition to the boundary, select [Show Chart Name].
5 To display ordinary chart information in addition to the boundary, select [Show ENC
Data] (displaying chart information).
When this item is not selected, the background chart is displayed.
Memo
While C-MAP is displayed, [Show ENC Data] is not displayed.
Active indicator ( )
Although the operation of each check box is enabled while the active indicator is displayed, a chart
boundary line is not displayed.
When the active indicator is hidden, a boundary line is displayed.
Overview chart
General chart
Coastal chart
Approach chart
Harbour chart
Berthing chart
Active indicator