Section 13 Operating a Chart (option) 13-30
13.12.2 C-MAP license information
13.12.2.1 License information display timing
When license information display is set to ON, the C-MAP license status is checked at the following
timing and related information is displayed on a popup window of the RADAR or ECDIS screen.
Timing Operation
[Chart]-[Show C-MAP License
Information] are selected on the
menu.
• Always a popup window is displayed.
• The static license is displayed.
• The dynamic license is displayed if it has been
activated.
The RADAR/ECDIS task is
started.
• When Chart Type of [View1] or [Vew2] is set to
C-MAP3 on the [View Options] dialog that is displayed
by selecting [View]-[Options]-[Chart View] on the
menu, a popup window is displayed if the condition is
satisfied.
• Although the static license is displayed, it is not
displayed if there is ample time until the expiration of
the static license.
• The dynamic license is displayed if it has been
activated.
The date of the UTC time is
changed while the
RADAR/ECDIS task is active.
• When Chart Type of [View1] or [Vew2] is set to
C-MAP3 on the [View Options] dialog that is displayed
by selecting [View]-[Options]-[Chart View] on the
menu, a popup window is displayed if the condition is
satisfied.
• Although the static license is displayed, it is not
displayed if there is ample time until the expiration of
the static license.
• The dynamic license is displayed if it has been
activated.
The Chart Type setting of
[View1] or [View2] is changed in
the [View Options] dialog by
selecting [View]-[Options]-[Chart
View] in the menu
• When Chart Type is changed to C-MAP3 from any
other types, a popup window is displayed when the
condition is satisfied.
• Although the static license is displayed, it is not
displayed if there is ample time until the expiration of
the static license.
• The dynamic license is not displayed.
To Next Page
Loading...
