JRC JMR-7282-S - Inserting a WPT between Wpts

9-43 Section 9 Route Planning
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Menu Function Related section
Add WPT Adds WPT. 9.7.3.4 Adding WPT on the context
menu
Move WPT Moves WPT. 9.7.3.5 Moving WPT on the context
menu
Delete WPT Deletes WPT. 9.7.3.6 Deleting WPT on the context
menu
Copy this route Copies the entire route. 9.7.3.7 Copying and pasting a route
on the context menu
Paste this route Pastes the copied route on to
another route file.
Rotate this route Rotates the route. 9.7.3.8 Rotating a route on the
context menu
Move this route Moves the route. 9.7.3.9 Moving a route on the context
menu
Insert other
route
Inserts another dialog into the route
that is being edited.
9.7.3.10 Inserting other route on the
context menu
Insert WPT Inserts WPT between WPTs. 9.7.3.11 Inserting WPT between
WPTs on the context menu
Divide leg... Displays a leg division dialog.
Divides the leg in the dialog.
9.7.3.12 Dividing a leg on the context
menu
Change XTD Changes the XTD (cross track limit). 9.7.3.13 Changing XTD (cross track
limit) on the context menu
4 After completing editing, save the route file.
For the details of how to save the file, refer to "9.5 Saving a Route".
9.7.3.1 Inserting a WPT between WPTs
1 Click the left button on the leg between the WPTs in which a WPT is to be inserted.
The leg is set to a selected state.
Click