Section 6 Target Tracking and AIS 6-38
6.5.8.2 [TT Simulator] (Target tracking simulator)
Pseudo-targets are generated in certain known positions to check whether the target tracking units are
operating normally. Since the pseudo-targets move depending on known parameters, the values for
these pseudo-targets can be compared with the known value if the pseudo-targets are acquired and
tracked, and displayed. Thus, it can be checked if the system is operating normally.
1 Click on the Standby/Transmit selector button for Radar system information to place
the radar in the standby state.
The button indication changes to [Standby].
2 Click on the [Menu] button on the left toolbar.
The menu is displayed.
3 Click on the [Settings] - [TT Test] on the menu.
The [TT Test] (Test for Target Tracking) dialog is displayed.
4 Select simulator scenario from the [TT Simulator] combo box.
Standby/Transmit selector button
To Next Page
Loading...
