Section 6 Target Tracking and AIS 6-14
6.3.7 Switching between Ground Vector and Water
Vector
The vector of an AIS target is to be displayed with a vector over ground or over water by switching the
stabilization mode. The type of the currently displayed vector can be confirmed by viewing the setting
of the stable mode.
When [GND] is selected for the stabilization mode: Ground vector
When [Sea] is displayed for the stabilization mode: Water vector
When the vector of an AIS target is displayed with a vector over water, the system has converted the
AIS target's vector over ground to the vector over water according to the data received from the AIS
and the own ship's information.
6.3.8 Association Target Symbols
Only a few targets transferred from the radar will be designated as associated targets and following
radar conventions the symbol for AIS Priority will be the default symbol.
Symbol display for high-priority TT targets Symbol display for high-priority AIS targets
If the operator wished to change to Tracked Target priority symbol follow the these instructions.
1 Right-click on the tracked target with association displayed.
The context menu appears.
2 Click on [Property] in the context menu.
The [TT Target INFO] or [AIS Target INFO] dialog appears.
3 Select [AIS] or [TT] from the [Priority] combo box.
[AIS]: The AIS target is displayed on a higher priority basis.
[TT]: The TT target is displayed on a higher priority basis.
Association targets
Association targets
To Next Page
Loading...
