14-47 Section 14 Creating a User Chart/ Updating a Chart Manually
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
5 Determine 3 or more vertices by repeating Steps 2 to 4.
6 Adjust the parameters on the object property dialog box.
7 To create an object on another position continuously, repeat Steps 2 to 6.
14.5.4.2 Creating an object with EBL/VRM operation
1
Click on the [EBL/VRM] button on the drawing toolbar.
The cursor changes to the EBL/VRM reference point cursor. (Refer to "14.2.5 Creating an
object in the EBL/VRM mode").
2 Click on the position of the reference point of the EBL/VRM marker.
The EBL/VRM marker is displayed.
3 Place the EBL/VRM marker on the starting position and click the mouse button.
A vertex is created on the position on which the button was clicked and the parameter
information is reflected on the object property dialog box. (Refer to "14.2.8 Object property
dialog box").
4 Click on the position of the reference point.
The EBL/VRM marker that determines the 2
nd
vertex is displayed.
5 Place the EBL/VRM marker on the 2
nd
vertex position and click the button.
A vertex is created on the position on which the button was clicked and the property information
is reflected in the object property dialog box. (Refer to "14.2.8 Object property dialog box").
The EBL/VRM marker is reset to the EBL/VRM reference point cursor.
2
nd
vertex
Starting point
To Next Page
Loading...
