Section 8 Functions of the ECDIS (Option) 8-26
Setting item Description Display image
[C UP
(Angle
Setting)]
Course UP by angle setting
• When this item is selected, the [C UP
(Angle Setting)] dialog box appears.
The course angle that was set on the
dialog is displayed right above the
chart and fixed.
- Input the angle of the ship's heading
in the [Angle] input box of the [C UP
(Angle Setting)] dialog box.
- The angle can be input
(increase/decrease) by operating
the angle input slider.
- After completing the setting, click on
the [X] button.
Display changes according to the selected bearing mode.
Heading line
Own ship
To Next Page
Loading...
