Section 9 Route Planning 9-40
4 Move the cursor and click the button while checking the leg bearing.
WPT1 is created at the intersecting point of the assistant circle and the supplementary line.
Memo
The direction of the leg varies according to the positional relationship of the cursor.
When the cursor is on the right side of the
position of WPT and the position used as the
mark, the leg will be on the lower side.
When the cursor is on the left side of the
position of WPT and the position used as the
mark, the leg will be on the upper side.
Supplementary line
Assistant circle
To Next Page
Loading...
