Section 10 Route Monitoring 10-8
[c] Turning mode
Displays a turning mode of automatic sailing.
Display Status
No display Automatic sailing inactive
MAN Manual course change mode
AUTO Automatic turning mode
(5) Switching tab
When this tab is clicked on, the contents of the following dialog are switched.
[Clicking on the [Autosail] tab]
The dialog is switched to [Autosail] (automatic ailing) dialog.
(a) Course to steer
Displays the course to steer to be transmitted to auto pilot.
(b) [Track Control Stop] (stop automatic sailing) button
To stop automatic sailing, click on this button.
The following message dialog is displayed.
When the [OK] button is clicked on, automatic sailing terminates.
Memo
When a message dialog box indicating the switching of the Auto Pilot mode to the
Manual mode is displayed, switch the Auto Pilot steering mode to the Manual mode.
[a]
[b]
To Next Page
Loading...
