Section 10 Route Monitoring 10-12
When the [Schedule] (schedule calculation) button is clicked on, a schedule calculation dialog is
displayed.
When the [Distance] (distance calculation) button is clicked on, a distance calculation dialog is
displayed.
[Schedule] Dialog
[1] [Destined WPT] combo box
Select a destined WPT.
[2] [Distance] (Distance up to the destined WPT)
Displays a distance from the own ship’s position to the selected WPT.
※[Setting]-[Route]-[Monitoring]-[Arrival circle] selected:[Distance]
[3] [TWOL] (Expected traveling time)
Displays a traveling time required based on the position from the current SOG value to the destined
WPT.
※[Setting]-[Route]-[Monitoring]-[Arrivalcircle] selected:[TTG]
[4] [ETA] (Expeced time of arrival)
Displays a time at arrival of the destined WPT from the current SOG value.
[5] [Calculation] (Calculation)
Selects a calculation method and enters the values.
[Schedule] Dialog [Distance] Dialog
[1]
[2]
[3]
[4]
[5]
[1]
[2]
[3]
To Next Page
Loading...
