JRC JMR-7282-S - Page 609

18-7 Section 18 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
Setting Item
Description of Setting
Setting Value
Process Switch
Range
Set up the boundary range of a particular area.
Enabled when [Range Fix] is selected in the Process
Switch combo box.
0.1 to 25.5 NM
Fast Target Detection
When this item is enabled, high-speed moving targets
that are suppressed by the scan correlation
processing can be detected more easily.
To enable: Select.
To disable: Clear.
SART
If it is enabled, the Radar Transponder (SART: Search
and Rescue Radar Transponder) screen can be
displayed. This item is valid on the RADAR screen
only.
To enable: Select.
To disable: Clear.