Section 13 Operating a Chart (option) 13-16
3 Place the cursor on the offset position and click the mouse button.
The reference point moves to the offset position.
A check mark ( ) is displayed on the [Offset] display (start of offset).
Offsetting a chart by entering an offset value
1 Enter offset values (latitude/longitude) in the [Offset] box.
The chart is offset.
Memo
The maximum latitude input range is 85 ° 00.000 (Maximum range of latitude that can
be operated during ECDIS mode).
Offset amount
Curso
Orange line
To Next Page
Loading...
