Section 14 Creating a User Chart/ Updating a Chart Manually 14-38
5 Determine the line by double-click on the button or click the right button.
6 Adjust the parameters on the object property dialog box.
7 To create an object on another position continuously, repeat Steps 2 to 6.
Memo
The property screen for the vertex that was created can be edited in AUTO mode.
For the details of AUTO mode, refer to "3.13 Cursor AUTO Mode".
Double-click
Determined with the line up to
the last vertex that was set
After determining of drawing,
the last vertex changes to the
end point.
To Next Page
Loading...
