14-61 Section 14 Creating a User Chart/ Updating a Chart Manually
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
2 Click on the position on which the information mark is to be created with the cursor.
The information mark is displayed on the position on which the button was clicked and the
parameters of the information mark are displayed on the object property dialog box.
3 Adjust the parameters on the object property dialog box.
4 To create an object on another position continuously, repeat Steps 2 and 3.
Creating an object by specifying the latitude and longitude
1 Click on the [Enter POSN] button on the drawing toolbar.
The [Enter Position] dialog box appears (Refer to "14.2.6 Creating an object by specifying
latitude and longitude").
2 Enter the latitude and longitude of the position on which an object is to be created and
click on the [Enter] button.
An object is created on the position of the specified latitude and longitude and the property
information is reflected in the object property dialog box. (Refer to "14.2.8 Object property
dialog box").
3 Adjust the parameters on the object property dialog box.
4 To create an object on another position continuously, repeat Steps 2 and 3.
Latitude and longitude of the
information mark creation position
To Next Page
Loading...
