JRC JMR-9230-S3 - Page 664

Section 18 Setting up the Operation Mode 18-62
Item saved
Preferences save target Factory setting value, value
and action when Set
Default button is pressed
Location Item
Vector mode
RADAR screen
- Other ship's information
• Vector/past position
true/relative
Relative
Vector time
RADAR screen
- Other ship's information
Vector Length 6min
Automatic
radar target
acquisition
Alert
- New Target Alarm
• AZ1 function On/Off
• AZ1 Start Angle value
• AZ1 End Angle value
• AZ1 Start Distance
value
• AZ1 End Distance
value
• AZ2 function On/Off
• AZ2 Start Angle value
• AZ2 End Angle value
• AZ2 Start Distance
value
• AZ2 End Distance
value
• AZ1 function On/Off: Off
• AZ1 Start Angle value:
315.0°
• AZ1 End Angle value:
045.0°
• AZ1 Start Distance value:
3.00NM
• AZ1 End Distance value:
3.50NM
• AZ2 function On/Off: Off
• AZ2 Start Angle value:
135.0°
• AZ2 End Angle value:
225.0°
• AZ2 Start Distance value:
3.00NM
• AZ2 End Distance value:
3.50NM
Graphical
AIS reported
target display
View
- Options - Target
• AIS Symbol display
On/Off
• Sleeping Class A,
Class B
• AIS Symbol display
On/Off: On
• Sleeping Class A, Class
B: Off
Radar and
AIS Target
fusion
Settings
- TT/AIS - Association
• Association function
On/Off
• TT/AIS Priority
• Association function
On/Off: On
• TT/AIS Priority: AIS
Collision
warning
RADAR screen
- Other ship's information
(Vector/Past
POSN/Limit/Trails)
• CPA limit
• TCPA limit
• CPA limit: 2.0NM
• TCPA limit: 12min