Need help?Do you have a question about the JRRacing XR3 and is the answer not in the manual?
General| Brand | JRRacing |
|---|---|
| Model | XR3 |
| Category | Remote Control |
| Language | English |
Adjusts the rotation direction of the steering and throttle servos for new models.
Sets the maximum travel range for steering, throttle, and channel 3 servos.
Electronic trim levers allow fine-tuning of servo neutral positions without changing endpoints.
Adjusts the center position of the steering servo via the trim lever.
Adjusts the center position of the throttle servo via the trim lever.
Adjusts the center position of the channel 3 servo if activated.
Details key features of the XR-3 transmitter and R-133 receiver.
Lists specifications for Z250 servos and overall system components.
Covers adjusting steering tension and using the transmitter charging jack.
Illustrates servo mounting and explains key inputs and display functions.
Describes the normal display, low battery alert, and lithium battery backup.
Indicates when programming changes need to be saved to retain data.
Step-by-step guide to selecting the Channel 3 function type (LN, 3P, or 0).
Allows selection between three stored models for different race setups.
Shows travel adjustment screens for Channel 3, functions LN & 3P.
Provides detailed steps to access and perform travel adjustments for various channels.
Adjusts center position for steering and throttle servos via dedicated trim levers.
To Next Page
