18
Threading preparations / Tips
1. Extend the retractable support rod tted with open thread guide as far as it goes.
2. Raise the presser foot. (Tension disk opens.)
3. Open the looper cover.
4. Turn the power on.
Threading sequence
The thread guides can be threaded in any sequence.
The threading sections are color coded correspondingly.
Threading the thread guide No. 1
Bring down the thread you have put on the retractable support rod
and t it in the thread guide No. 1 until you hear a click.
Bring the thread toward you along the groove.
Lower looper thread (red markings)
Upper looper thread (purple markings)
Right needle thread (green markings)
Left needle thread (beige markings)
To Next Page
Loading...
