JUKI MO-2800 - Accessories; Thread Stand

6
Thread stand
Push the support rod rmly into the socket on the back of the ma-
chine.
Raise the support rod (A) fully, turning slightly until the position
catches engage. Position the thread guide (B) on the thread stand
so that the arrow is to the front.
Details of the machine
●
Accessories
Brush/needle inserter Tweezers
Electronic foot control
Nets
Dust cover
Accessory bag
Needle set
HA×1 No.80(No.12)×3
No.90(No.14)×2
Waste collector
Spool caps
Looper threader
・
Instruction manual
(This manual)
Curve foot
Wool needle
Knee lifter lever
Screwdriver
T-shape
screwdriver
Oil
A
B